HANDLING & SAFETY TOOLS

Drill Pipe Elevators

Types:

Square Shoulder (TMA 100-TON / MRA 175-TON)
Bottleneck (RG, MGG, GG, HGG)
Slip Type Elevators (LYT, MYT, YT, HYT, HYT-SS, HYC, HYC-XR, MYC & YC)
Slim Hole (SH-MYT, SH-YT, SH-HYT)
Side Door (SLX 65, 150, 250, 350 TON)
Single Joint Elevators (SJ 7.5 TON)
All elevators include Safety Latch Lock pins designed to keep the elevators safety latch lock in place.
Manufactured to meet or exceed API 8C standards

Safety Clamps

The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member, much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, each small slip takes a firm initial grip on the surface of the pipe.

Should the pipe start to fall, or should load increase occur against the slips, the taper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against further movement.

Types:

C, T, & MP Safety Clamps

Manufactured to meet or exceed API 8C or API 7K

Drill Pipe Slips

These slips are standard equipment for running tubulars such as drill pipe, drill collar, and casing. In addition, all KET rotary hand slips have an API taper of 4″/ft on the diameter, are load rated and equipped with safety flex handles.

Types:

Drill Pipe Rotary Slips (DU, SDML, SDXL & TYPE B)

Designed to be used when adding or removing joints from the drill string.

Drill Collar Slips (A, C-1, DCS)

Designed to be used with running drill collar pipe

Casing Slips (CMSXL & CMS-3)

Designed to be used when running casing.

Tong Safety Handles

Types:

Dumbbell Tong Safety Handle
Safety Cap Assembly for Varco Tongs
Safety Bumpers (for use on ST-80 Mud Buckets)

Stabbing Guides

Offering two types of Drill Pipe Stabbing Guides, the Heavy Duty type which is recommended for drill pipe and also the Hydril® rubber type to be used on tubing. Stabbing Guides help to reduce damages to connections while making up connections.

The Heavy Duty Type features include:

Polyurethane Inserts
Lightweight Aluminum construction
Corrosion Resistant Hardware
Adjustable Latch Cam
Range = 2 3/8 thru 8 ½” Tool joint OD

The Hydril® Rubber Type features include:

One Piece Rubber Body
Replaceable Latch & Catch
Range = 3/4″ thru 4 1/2″

Drill Pipe Float Valves

Drill pipe float valves are essential for drilling, and must stand the test of harsh environments. As such, the cages are cast out of alloy steel specifically for today's increasingly intense drilling environment. This includes:

Heat treating to prevent the corrosive effects of hydrogen-sulfide gas (H2S)
Manufacturing from one-piece casting to produce a superior and more reliable valve body
Offering additional options of stainless steel and Nickel Plated valves to prevent highly corrosive environments

Types:

F, FA, FC, F-10, F-15, G, GA, GC, GCA, GS, GAS, G-10 & G-15

All Float Valves, baffle plates, and valve pullers are interchangeable with the Baker® Style Model F, and Baker® Style Model G Float Valves.

Certified & Pressure Tested

Dies & Inserts

Offering a full line of inserts and dies which include: elevator inserts for all Slip Type Elevators; slip inserts for drill collar, rotary, and casing slips; tubing and drill pipe tong dies; and coil tubing inserts for elevators, slips, and spiders.

Tong dies for the ST-80 Iron Roughneck are also available.

Elevator Inserts: BJ® & Varco® style

Slip Lifting Device

Comes in pneumatic or hydraulic configurations and is designed to be used while tripping in or out of the hole to help reduce fatigue and prevent injuries.

Available for pin-drive or square-drive master bushings
Can be used with conventional rotary, drill collar, or casing slips

Elevator Links

Offering a wide range elevator links (bails). All Links are certified, magnetic particle inspected and 1.5x load tested:

Work Over Links:

API monogramed, rated to 150 tons
Available in 36"-120" lengths.
Forged from a single piece of high grade alloy.

Weldless Links:

Connects the block hook and elevator to allow the tubing / casing to rotate horizontally when removed from the hole.
Rated to 200, 250, 350, 500, 750 or 1,000 tons

Extension Links:

Connect to standard links, eliminating the need to install extra long links
Decrease downtime
Rated to 350 tong
Lengths ranging from 72", 96", 120" or 144"
Forged in the USA

Electro Weld Links:

Rated from 20 - 100 tons
Lengths ranging from 18" - 84"

Drill Pipe Spinners

Durable, easy to use and designed for safety and longevity.

SSW-40:

requires no dedicated power source (power units are available)
pipe sizes 3-1/2" - 9-1/2"
Adapter for 2-7/.8" available for some models

GrayChain®:

Models: 3570 & 3595
Hydraulic & Pneumatic versions
Pipe size range 2 7/8”, 3 1/2” to 9 1/2”
Durable chain drive
Rugged construction
Field repairable
Cost effective
Quick size change adjuster

GraySpin®:

Models: 10, 20, 30 & 40
Hydraulic & Pneumatic versions
Pipe size range 2 7/8”, 3 1/2” to 9 1/2”
Durable Polyurethane Drive Rollers
Rugged construction
Field repairable
Cost effective
Simple and quick size change through slip pins

Hawk Spinmaster:

Models: 550 & 950
Hydraulic & Pneumatic versions
Pipe size range 2.875" - 5.5" (550) & 2.875" - 9.5" (950)
High torque output of up to 2272 ft. lb.
Roller type chain
Quick pin release
compact, light weight design

HANDLING & SAFETY TOOLS

The Heavy Duty Type features include:

The Hydril® Rubber Type features include:

MADE IN THE USA