281-492-6622
OILFIELD INSTRUMENTATION
Piston Separator
Handling working pressures up to 15,000 PSI, this Piston Separator helps to transmit well fluid pressure (acid, cement, and mud) to gauges or recorders remotely located. Pressures are acquired using a 1/4 inch high pressure hose with a 1:1 ratio during transmission.
Features
-
Up to 15,000 PSI working pressures
-
Full stroke volumetric capacity 13.4 cubic inches (220 cubic centimeters)
-
2″ mounting pipe size
-
150% Proof test pressure ratings
Weight Indicator (Anchor-Type)
Features
-
Available from 30,000 to 200,000 pounds
-
Mounting applications include weight indicator box or console
-
Pointer sensitivity regulated by the damper stem in case of jarring
-
Includes outer dial (weight on bit) and inner dial (hook load)
-
4:1 weight on bit sensitivity for accurate readings
-
Desired hose lengths are available (50′ standard)
-
Tension or compression load cells for anchor mounting
-
Driller’s box with anchor type weight indicator can be customized to include:
-
Pump pressure
-
Ton line pull
-
Pump stroke meter (SPM)
-
Rotary torque gauge or RPM meter
-
Electric torque meter
Specifications
-
Large 12″ or 16″ indicator for easy viewing
-
Tension load cell (36.7 sq. in.)
-
Compression load cells 16.1, 36.7, &50.0 sq. in.
-
Accuracy: +/- 0.5%
-
Heavy duty built to last weight indicators for long term drilling in all conditions
-
Available in pounds, kilograms, decanwetons, and lilonewtons
-
Dual scale readings upon request
Pump Stroke Counter / Rate Meter
Provides Total Strokes and Strokes per Minute, Available in 4 or 6 Windows
Displaying both the total number of strokes and the strokes per minute for two or three mud pumps (up to 1,024 strokes per min per pump), the Acadiana Oilfield Instruments’ pump stroke counter has easy to use push buttons for resetting the pump count. Built in a stainless steel design, this indicator will last in any environment.
Features
-
Displaying stroke numbers from 0 to 9,999
-
Displays number of strokes per minute from 7.5 to 1,024
-
LCD display height is .7 inches
-
Small current consumption – 100uA in standby mode
-
Weighs 4 pounds
-
Temperature operation is from -4° to 140°F (-20° to 60°C)
-
Size 7-7/8 H x 7-7/8 W x 3 inches in Diameter
-
Models can meet Class 1, Division 1 standards
-
Models can display strokes for 3 pumps
-
Models are available for 2 or 3 pumps
4:1 Pressure Debooster
Pressure Deboosters enable accurate readings to pressure gauges, transducers, and recorders by reducing high line pressures. Acadiana Oilfield Instruments has a complete line of deboosters with a 4:1 ratio for testing operations to help with your gauge indications while cementing and fracturing.
Features
-
Works with a max incoming working pressures of 10,000 PSI, 15,000 PSI and 20,000 PSI
-
Provides readings over a distance of 100 feet
-
Available in H2S models and standard service models’ mounting pipe size
-
4:1 reduction of line pressure
Benefits
-
Several solution based models to choose
-
High accuracy rate of +/-1% of full scale
-
Optimal for use with pressure gauges, transducers, and recorders from Acadiana Oilfield Instruments
-
Calibrated to use with Acadiana Oilfield Instruments pressure deboosters
Choke Gauges
Choke gauges help expose mud pump operation complications. Acadiana’s choke gauge is very versatile and can be mounted on the mud pump, in the driller’s console or in a weight indicator box.
Benefits
-
Fluid filled dial 6″ or 8-1/2″ dial face for easy reading
-
Includes an operator adjustable high pressure damper which provides for accurate readings
-
Can handle any environment with protection provided by the fluid inside the gauge
-
Small pressure changes are indicated with the full 360° dial calibration with fine increments
-
Easily mountable: driller’s console, on the choke manifold or in a weight indicator box
Features
-
Small pressure changes of 10 to 20 PSI can be detected
-
Pointer sensitivity regulated by the high pressure damper stem
When Ordering Indicate:
-
Gauge capacity
-
Gauge mounting
-
Units of measure
All Hercules Deadline Anchors are fabricated from high-grade structural steel and welded to meet all regulatory requirements for working in any sort of environment. Proof tested at 150% of rated capacity and held for 5 full minutes after assembly, these deadline anchors are built to withstand the mentioned pull capacities.
Benefits
-
Highest accuracy levels due to center point mounted drums
-
Extended cable life from a smooth, machine grooved drum
-
Easy installation and service
-
Ensured reliability due to 150% proof testing of rated capacity
-
Intense cable grip resulting from durable bronze wireline clamp inserts
-
Constructed of heavy duty high grade structural steel, anti- friction bearings, and a heat treated alloy shaft
Features
-
Right and left hand models available
-
30,000 to 150,000 pounds of deadline pull capacities
-
Handles wireline sizes from 5/8 inches to 1 7/8 inches
-
Offering a variety of models from models for mounting on wheel mounted rigs or helicopter rigs and models designed for drilling masts of up to 2 million pounds
-
Super Grip (SG) Series Anchors securely grip plastic filled wire rope along with standard wire rope
When Ordering Indicate:
-
Derrick capacity in pounds
-
Number of lines strung
-
Right or left hand model
-
Size of drilling wire and size of rig